86-0769-82797008
Contact Us

REFINE OPTO CO.,LTD

Tel:86-0769-82797008

Fax:86-0769-82797018

Mob:86-18688671516

skype:Wilsonxie-refine

Address:Yinyang Industry Park, Fuzhu Street1, Zhangyang, Zhangmutou Town, Dongguan, Guangdong, China

Common Problem
Your current location is:首页>>News>>Common Problem

No output, normal fuse

Release Time:2018-11-30 11:03:52  Views:

This phenomenon indicates that the switching power supply is not working or has entered the protection state. Firstly, it is necessary to measure whether the starting pin of the power control chip has a starting voltage. If there is no starting voltage or the starting voltage is too low, it is necessary to check whether the starting resistor and the external component of the starting pin are leaking. At this time, if the power control chip is normal, the above check is performed. You can quickly find the fault. If there is a starting voltage, then whether the output of the control chip has a high or low transition at the instant of power-on, if there is no jump, it means that the control chip is bad, the peripheral oscillator circuit component or the protection circuit has a problem, and the control can be replaced first. Chip, then check the external components; if there is a jump, the switch is generally bad or damaged.

Previous:Output voltage, but the output voltage is too high    Next:最后一篇

CONTACT US

Yinyang Industry Park, Fuzhu Street1, Zhangyang, Zhangmutou Town, Dongguan, Guangdong, China
86-0769-82797008
86-0769-82797018

Monday-Friday

SEND MAIL

Send us Email for latest update new offer and free Consulation,We are available

Skype:wilsonxie-refine

Copyright 2018 © REFINE OPTO CO.,LTD